เอวีร่อน TNX TIMER

 

  1. Aluminum Die-Casted Box

     As the PCB of TNX timer is located in the aluminum 
     dis-casted box, it facilitates the water-proofing and
     dust-proofing.

  2. All function in Digtal

     Using the highly quantitative micro-computer circuit,
     when the noise inflow from the outside, the program  
     in the EP-ROM pack senses the noise, and performs
     the function of auto-compensation.

  3. Pre-Wired with Solenoid

     TNX timer includes the built-in solenoid coils(PM-63)
     and all necessary wiring. There should be no need to
     wire between timer card and solenoid coil to prevent humidity/dust from corrosion of coil.

  4. Exterior design for all controls

     It has exterior displays like main power switch, time setting keys. These exterior displays allow
     the monitoring, time setting and damage checking of the timer without opening the timer case.

  5. Free Voltage Function 

     This timer board has a free voltage function (AC85 ~ 240V/50 ~ 60Hz)

  6. Variety of Single/Multiple/Central Control

     By using a Remote ON/OFF and Finish signal output functions, TNX timer is available in Sing/Multiple/ 
     Central control that fits your Dust collector system.

 

   

  

    

    

Visitors: 34,808